我们使用换热器久了之后,有一些零部件需要我们进行更换,垫片也是其中之一,下面给大家介绍一下具体的更换顺序。
应按以下顺序进行
1、拆下换热器的废旧垫片,注意拆卸时,不得使垫片槽内有划痕。
2、用丙酮、丁酮或其它酮类溶剂,清除垫片槽内的残胶。
3、用干净的布或者是棉纱擦净垫片槽和垫片。
4、将粘接剂均匀地涂在垫片槽内。
5、把干净的新垫片贴在板上。
6、贴好垫片的换热器板片要放在平坦、阴凉、通风的地方自然干固4h后才可安装使用。http://www.ccaudi8.com
换热器目前应用非常广泛,具有很好的发展前景,是大家值得信赖的产品。以上就是今天的内容,希望大家能获得帮助,继续关注我们可以了解更多相关知识。
We use the heat exchanger for a long time, there are some parts that we need to be replaced, gasket is one of them, the following to tell you about the specific replacement sequence.
Should be carried out in the following order
1, remove the heat exchanger of the waste gasket, pay attention to the demolition, not to make the gasket groove scratches。
2, with acetone, butanone or other ketone solvents, remove the residual gasket groove.
3, with a clean cloth or cotton yarn wipe the gasket groove and gasket。
4, the adhesive evenly coated in the gasket groove.
5, the clean new gasket attached to the board。
6, posted a good gasket heat exchanger plate should be placed in a flat, cool, ventilated place of natural dry solid 4h before installation.
Heat exchanger is currently widely used, with good prospects for development, is our trusted products。 The above is the content of today, I hope you can get help, continue to focus on we can learn more about the relevant knowledge。